SEMINGIGONG CO, LTD

Ultra Power Epoxy

작성자 최고관리자
댓글 0건 조회 5회 작성일 25-12-24 10:16

Product

- Eco-friendly, almost odorless and solvent free

- Compressive strength : 100(N/mm²)

- TVOCs/0.39, VACs/Zero

- Heavy metal(Cd, Hg, Pb, Cr+6, PBBs, PBDEs) not detected

- No primer

- Ideal for poor ventilation area like basement

- Supplied to semiconductor factories

Benefits

Composed of modified epoxy resin with proprietary hardener
Solvent free product
Nearly odorless
Safe for human
Exhibits excellent adhesion and anti-dust properties
Resistant to acid, alkaline, oil
High abrasion resistance to bear vehicle traffic in parking lots, factory floors etc.
Almost odorless product suitable for semiconductor factories, electric factories, feeding facilities, food
factories, bottling plants

Application

Parking lot floor in basement demanding odorless products
Interior floor.
Floor of machine room or transformer room.
Repainting or resurfacing of existing surface.
Areas with poor ventilation such as water tank in basement, water pipe, water intake, septic tank, tunnels, bunkers, silos etc.
Semiconductor facilities, electronics factories or food factories requiring chemical resistance and odor
sensitive applications.

Technical Data

Main component : modified epoxy resin, proprietary hardener.
Recommended thickness : 1 ~ 5mm
Technical consumption : 1.4kg/㎡/1mm – color.
Density : 1.4 (color) , 1.2 (transparent)
Solid content (weight ratio) : about 100%
Pot life : 4 hrs.
Tack free time : 8 hrs. (25℃)
Curing time : 15 hrs. (25℃)
Mixing ratio (weight ratio) : component A : component B = 4 : 1 (color), 2 : 1 (transparent)
Tools : roller, airless spray gun, rake or trowel

Application Procedure

Preparation of substrate
- Concrete substrate must be cured for more than 4 weeks.
- Moisture content must be below 8%
- The surface should be free of oil, moisture, laitance and any other contamination which would affect bond strength.
Base layer : 1 layer
- Blend two components with an electric mixer in the correct proportion and apply with roller, airless spray, rake or trowel.
Top layer : 1 ~ 2 layer
- After initial dry time of the base layer, blend two components in the same method and apply top layer depending on desired thickness.

Health and Safety Precaution

Wear protective clothing, gloves, eye protection and dust mask during work.
In case of contact with skin or clothing, wipe off with a cloth and wash with soap and water.
If the product is swallowed, inhaled or gets in eyes, wash it off with plenty of clean water and seek medical advice immediately.
Provide ample ventilation when working with the product in confined spaces.
No naked flames, cigarettes or matches should be allowed near the products.
Dispose of waste and residues in accordance with local authority requirements.
In all cases, users should refer to the most recent the Material Safety Data Sheet (MSDS) before use.

Storage

Stored products above 5℃ in unopened original containers protected from sunlight and frost.

Shelf life

8 months (stored away from moisture and direct sunlight)