Ultra Top
페이지 정보

본문
Ultra Top
- Trademark Registration : No. 40 – 1148895
- Water-based epoxy & no primer
- Excellent hardness and abrasion resistance
- Ideal for parking lot floors
- Nontoxic finish without endangering your health
Description
- Water-based epoxy
- High hardness additive
- Super hard & strong for thin coat
- Exhibits excellent adhesion and anti-dust properties
- Resistant to water and abrasion
- Abrasion resistance is 3H
- Solvent free
- Safe for human
- Eco-friendly
- Almost odorless before & after application.
- Parking lot floor in basement
- Floors in machine rooms or transformer rooms
- Repainting or resurfacing of existing surface (epoxy, floor stain)
- The floors in factories or shopping malls requiring higher hardness and abrasion resistance.
- Areas with poor ventilation such as basement water tank, water pipe, water intake, septic tank, tunnel bunker, silo
- Bicycle lane or foot path
- Main component : water-based modified epoxy polymer.
- Recommended thickness : 250㎛
- Technical consumption : 0.25kg/㎡
- Pot life : 2 hrs.
- Tack free time : 40 min. (25℃)
- Curing time : 6 hrs. (25℃)
- Mixing ratio : component A : component B = 1 : 1.
- Diluent : clean water
- Tools : brush, roller, airless spray gun
- Preparation of substrate
- Concrete substrate must be cured for more than 4 weeks
- Moisture content must be below 8%
- The surface should be free of oil, moisture, laitance and any other contamination which would affect bond strength.
- Base layer : 1 layer
- Blend transparent component A with component B at the weight ratio of 1 : 1 by using an electric mixer, dilute it with 10~20% of water and apply with brush, roller and airless gun.
- Top layer : 1 ~ 2 layer
- After initial dry time of the base coat, blend color component A with component B in the same method, dilute it with 5~10% of water and apply with brush, roller and airless gun to create 2 coats.
- Wear protective clothing, gloves, eye protection and dust mask during work.
- In case of contact with skin or clothing, wipe off with a cloth and wash with soap and water.
- If the product is swallowed, inhaled or gets in eyes, wash it off with plenty of clean water and seek medical advice immediately.
- Provide ample ventilation when working with the product in confined spaces.
- No naked flames, cigarettes or matches should be allowed near the products.
- Dispose of waste and residues in accordance with local authority requirements.
- In all cases, users should refer to the most recent the Material Safety Data Sheet (MSDS) before use.<
- 이전글Ultra Power HD 25.12.24
- 다음글Ultra Power Epoxy 25.12.24


