SEMINGIGONG CO, LTD

Ultra Power AC Coat

작성자 최고관리자
댓글 0건 조회 8회 작성일 25-12-24 10:17

Product

Superior Acid Resistance & Modified Epoxy

- Anti 95% of sulfuric acid & ideal for battery plants

- Excellent abrasion resistance

- No primer & remarkable adhesion

- Almost odorless

Benefits

Composed of modified epoxy resin with proprietary hardener
Tolerating 95% of sulfuric acid without blister, splitting or peeling
Resistant to acid, alkaline, chemicals, abrasion
Solvent free
Safe for human
Exhibits excellent adhesion and anti- dust properties
Suitable for concrete or steel surface in factory floor, inner & outer part of pipe and water pipe inside , which is at the risk of damage and corrosion caused by alkaline or sulfuric acid.

Application

New building or repainting area where sulfuric acid or chemicals are used.
Repainting or resurfacing of existing steel or concrete structure requiring acid and alkaline resistanc
Highly corrosive areas with poor ventilation such as steel water pipe in basement.
Steel or concrete surface in semiconductor facilities, electronics factories, plating factories, battery factories, bottling plants, food factories, chemical laboratory requiring acid and chemical resistance

Technical Data

Application Procedure

Preparation of substrate
- Blasting for steel is recommended to SSPC SP-10(SIS Sa 2.5) specification.
- The substrate should be free of oil, dirt or any other contaminations that would affect bond strength.
Base layer : 1 layer
- Blend two components with an electric mixer in the correct proportion and apply with roller, airless spray gun or brush.
Top layer : 1 ~ 2 layer
- AAfter initial dry time of the base coat, blend two components in the same method and apply top coat depending on desired thickness.

Health and Safety Precaution

Wear protective clothing, gloves, eye protection and dust mask during work.
In case of contact with skin or clothing, wipe off with a cloth and wash with soap and water.
If the product is swallowed, inhaled or gets in eyes, wash it off with plenty of clean water and seek medical advice immediately.
Provide ample ventilation when working with the product in confined spaces.
No naked flames, cigarettes or matches should be allowed near the products.
Dispose of waste and residues in accordance with local authority requirements.
In all cases, users should refer to the most recent the Material Safety Data Sheet (MSDS) before use.

Storage

Stored products above 5℃ in unopened original containers protected from sunlight and frost.

Shelf life

8 months (stored away from moisture and direct sunlight)